Engine Heaters


Shop for bilge heaters now.

The BoatSafe® marine engine compartment bilge heater is the most extensively tested product of its kind. We have a history dating back to 1990 and numerous certifications for safety. We know how to help you winterize your boat.
Description

This product provides forced-air heat through a patented case design to keep your engine compartment safely above freezing while maintaining ignition protection. When the bilge heater’s sensor detects an ambient temperature of approximately 45º Fahrenheit (7.2ºC), it turns on and remains on until the engine compartment reaches approximately 55º Fahrenheit (12.7ºC).
Which unit is right for your boat?

Benefits

  • Extend your boating season
  • Economical to use
  • Helps to keep engine(s) and wiring dry and corrosion free
  • Helps to improve battery performance
  • Enhances the resale value of your boat
  • Saves money by eliminating the annual costs of winterizing & de-winterizing your engine(s) in some climates
  • Meets U.S. Coast Guard Ignition Protection Standards
  • Extensively and independently tested for your safety and benefit
  • Full One Year Warranty plus a lifetime service guarantee

Beginning in 2008 the BSAT 750 Watt bilge heater will have these additional benefits

  • Push to test feature
  • Horizontal and vertical mounting capabilities

Requirements and Applications

  • Both bilge heaters require a consistent and dependable source of power to operate efficiently.
  • These bilge heaters require either 120 Volt Shore power or Gen-Set power. Both units may be plugged into the power source.
  • To eliminate the possibility of electrical sparking, either hard-wire or use a power source external to the engine compartment.
  • Due to variations in engine compartments, below deck equipment and geographic location, some boats may require a larger or an additional bilge heater. Consult your dealer or call us directly for recommendations specific to your boat and climate.
  • Any boat stored out of the water on a lift or on a trailer will require our BSAT 750 Watt bilge heater.
  • Professional installation is recommended, but complete instructions are included.